Winners Revealed for the 2020 BOAT International Design and Innovation Awards

Outstanding Exterior Design Motor Yachts – 24m to 49.9m

Race

Length: 49.9m

Exterior stylist: Officina Italiana Design

Naval architecture: Riva

Builder: Riva

The task for the design and build team behind Riva’s flagship Race was to combine the beauty typical of the Riva brand with the functionality of a superyacht and incorporate the owner’s demand for an all-round experience of the sea and an uninterrupted view of the coast or horizon. Designers Officina Italiana Design incorporated Carlo Riva’s classic Riva design language, which includes trademark materials such as stainless steel details and varnished mahogany handrails, along with a balanced and appealing profile. The decks are defined by strong horizontal lines and masculine angles, unlike the feminine curves of many of her Riva predecessors. Although the 120m² sundeck sports a substantial hardtop for shaded al fresco dining, there are naturally a lot of sunning spaces, including a walkaround bridge deck and forward seating area plus an elegant cockpit at the bow. The built-in exterior furniture is crisp and neat – inkeeping with the yacht’s lines – and covered in the consistent dark mahogany veneer. Race narrowly edged out another Italian builder, Pershing, and its flagship 14 Chorusline, which the judges noted had several bold and innovative styling features.

Outstanding Exterior Design Motor Yachts – 50m and above

Lady S

Length: 93m

Exterior stylistMichael Leach Design

Naval architectureFeadship De Voogt

BuilderFeadship

Michael Leach Design hid the yacht’s high volume within a contemporary low profile, with a near plumb bow, a visible chine and complex shapes and beauty lines that employ shadow rather than paint to break up hull surfaces. Bands of black glass emphasise the yacht’s length. Judges appreciated the open and very liveable deck spaces and the transparency between decks brought about by balconies with glass inserts and a clever wasp waist that makes the helipad/sundeck seem like a special destination while ushering light to the owner’s deck below. The way the gym’s full-beam skylight transitions to opening glass walls presented an engineering challenge to builder Feadship, as did the owner’s insistence that there be no exposed hinges on any exterior doors or opening panels. Maximising sleekness, stern bollards hide below sections of deck and air intake grilles are disguised by strips of glass. A massive pool on main deck links the stern beach club to the living areas and guest accommodation. A touch-and-go landing area forward of the master suite can be rigged as a sports court in minutes and three huge hatches open the beach club, sports bar and massage room to the sea at the stern.

Copyright Edmiston

Outstanding Exterior Design Sailing Yachts

Liara

Length: 34.1m

Exterior stylist: Malcolm McKeon Yacht Design

Naval architect: Malcolm McKeon Yacht Design

BuilderBaltic Yachts

With this selection, the judges were equally impressed with innovation and aesthetics. While Liara is not a huge yacht, her owner has big cruising plans. The boat is designed to take him and his wife on a safe and easy circumnavigation with careful thought on how to keep the cockpit dry and warm or equally shaded from the broiling sun. Yet competitive sailors often find it hard to abandon the excitement of racing completely, and eventually the brief to Malcolm McKeon changed to accommodate the occasional superyacht regatta, which led to the design and construction of a removable hardtop for the now multipurpose sloop. Carbon-fibre and foam cores infused and vacuum- bagged resulted in a light but strong top that can easily be removed by the crew and stored ashore. The fact that Liara presents a lovely profile in both cruising and racing modes is noteworthy. Accommodating the gear of a racing boat without torturing a cruising layout was addressed by individual deck access bins for large racing sails and clever ’tween deck positioning of most sheets, winches and sheaves, a feature that keeps the deck safe and uncluttered for passages.

Best Motor Yachts Interior Design – above 500GT

Lady S

Length: 93m

Interior design: Reymond Langton Design

Naval architecture: Feadship De Voogt

Builder: Feadship

The result of a lengthy design and build process where perfection was paramount, Lady S pleased the judges with a complex, multilayered interior that manages to pair extreme elegance with fun and entertainment.The interior reads as mostly white to serve as a foil to the turquoise colours of the family’s favourite cruising grounds. The range of exquisite materials and details employed creates enough drama to keep guests intrigued no matter the length of the stay. A clever layout showcases adaptability for charter with either four, five or six cabins on main deck, plus a pair of staff cabins with access to both crew and guest passageways. The owner’s deck lounge can transform into a disco with interactive dance floor. Lady S was built to house the first floating IMAX cinema, which spans two decks and is large enough to seat all guests at once. A separate boarding entrance for the theatre is a nice touch. Locating the beach club and gym on different decks provides guests with elbow room, as do folding terraces and balconies off cabins. Large pantries on each deck, two galleys and multiple crew stairways are part of the well-conceived service plan.

Copyright Edmiston

Best Naval Architecture Semi-Displacement or Planing Motor Yachts

Zalanka

Length: 27.3m

Naval architectDominator

Builder: Dominator

Evaluating supplied data from very different types of yachts, especially when they have a variety of propulsion methods, makes for an interesting number-crunching task for the naval architecture sub-committee. As contrasting as their above waterline appearance is, their hull materials, underbodies, power, design speeds and propulsion are equally different and first had to be considered for their appropriateness to the yacht’s stated mission. While all three finalists did well on that basis, Dominator’s Illumen 28, Zalanka, the fourth hull in this model series from the Austria- headquartered, Italy-based builder, achieved the best total score on the basis of achieving higher marks for her seaworthiness, hydrodynamics and cruising range.The hull shape uses a combination of methods to increase efficiency and was developed using computational fluid dynamics followed by model testing in a towing tank — always the best practice although a more costly approach — and the entire naval architecture solution included finite element analysis to pinpoint ways and places to reduce weight aloft for greater cruising economy and passenger comfort. In the judges’ opinion, that’s exactly what was achieved in Zalanka.

Best Naval Architecture Sailing Yachts

Canova

Length: 43.3m

Naval architect: Farr Yacht Design

Builder: Baltic Yachts

The entries put forward in this category this year included both cruisers and racer/cruisers yet the system developed by our expert judging sub- committee can quite fairly score them together. Of the finalists, both Liara and Canova are fully custom yachts developed to match specific owner briefs and were able to show more R&D detail. While both achieve their performance targets, Canova steps ahead on innovation, being the first large yacht fitted with a DSS foil and contributing to the science on this method of enhancing stability. Adding up the points applied for all factors, Canova displayed a higher overall naval architecture profile along with a higher mark for hydrodynamics. While our judges noted that the entry did not have enough miles under sail to adequately note the impact of the foil purely on speed, Farr’s hull itself was impressive. Sea trials confirmed predicted performance numbers and showed that Canova could comfortably achieve boat speeds equal to wind speed in moderate to strong conditions. Deployed by the push of a button, the foil’s positive impact on Canova’s stability and righting moment was obvious both in data and in videos of the yacht under way.

Innovation of the Year

4-Ply Complex curve structural

On board: Syzygy 818, Feadship

Developer: Jarkko Jämsén/EOC Engineering/Feadship

Naval architecture: Feadship De Voogt

Featuring giant slabs of perfectly clear glass that are both vertically and horizontally curved, Syzygy 818, the first superyacht designed by Finnish naval architect Jarkko Jämsén, displays a remarkable feat of engineering and construction. This all-glass envelope is an integral part of his theme, bringing the outdoor environment into intimate contact with the interior. Jämsén took the concept of structural glass a step further by curving the glass to control and slow the movement of reflection across the surface. The glass envelope on two and a half decks is fundamental to the watertight integrity of the yacht and was meticulously examined by Lloyd’s. These panels are coupled to each other on the sides, with connections to the ceiling and floor constructed so that the boat flexes around the glass. Being structural from ceiling to deck, the four-layer panels are made of two types of low-iron glass. One has a reflective coating, while a neutral grey film interlayer controls the amount of sun light entering without distorting colour. Eckersley O’Callaghan, a London-based company famed for its award-winning work with structural glass, developed a unique mathematical formula for each panel, some of which are 3m wide, 2.7m high and 4.5cm thick.

Copyright Feadship

Tender of the Year – Limousine

Solas

Length: 11m

Builder: Knierim Yachtbau

Naval architect: Beiderbeck Designs

Exterior stylist: Beiderbeck Designs

Interior design: Beiderbeck Designs

The top tender of the year in the limousine category stood out immediately in a field of very strong candidates with numerous notable features such as good looks, good comfort and, importantly, the ability to fit snugly inside a yacht garage witha total height of just 2.4m. However, this 11m tender, part of a pair custom-built at the Knierim Yachtbau yard in Kiel for a Lürssen, offers something new over all the other candidates. It can serve both as the guest tender with comfortable accommodation in a sheltered, air-conditioned interior that will deliver 15 dry guests to shore at speeds up to 30 knots, thanks to two Volvo Penta D3 220 engines. At this speed, even water-skiing is an option too. And the Solas tender can also hold up to 38 people when acting as a rescue boat in an emergency. Along with uncommon features such as a bar with a refrigerator and a comfortable wet room, its design and construction comply with stringent SOLAS rules. It is fire resistant and can be dropped to launch, plus it is certified to withstand the most rigorous sea conditions. In essence, it serves two functions, solving an issue that has plagued the industry for years: the need to carry several auxiliary boats.

Tender of the Year - Open

Tender 15

Length: 4.5m

BuilderSchaaf Yachtbau

The winner of the open tender category – the Tender 15 – stood out for the judges with its unique features, including its petite dimensions and ease of use, which make it a good contender for smaller yachts – indeed, it was designed and built to accompany a 30m Sunseeker. At 4.5m long by 2m of beam, and just 1m high, it is small enough to be stowed on many a yacht’s bathing platform, which means it can be launched and retrieved without the use of expensive equipment or heavy cranes. Built in carbon composite by German custom boat builder Schaaf Yachtbau, with two integral “skids” to support it without a cradle, it is also light (730kg of dry weight including its 80hp Mercury outboard) and sturdy enough to be parked on the hard in a marina. Those “skids” are also an essential part of the distinctive and modern design language of the Tender 15. If need be, it can accommodate up to seven passengers and carries around 70 litres of petrol or diesel fuel (for the inboard version). The hull shape gives it a dry ride. Easy water access makes it useful for diving or tow sports. Judges appreciated its innovative, simple design that is reminiscent of the original Boston Whaler dinghy.

Young Designer of the Year Award

Valentin Weigand

Concept Name: Plato

Nationality: German

Education: ENSA Nantes

The aim of the Young Designer of the Year competition is to identify the best trainee designers and encourage them to join the superyacht industry. The task that is set for entrants is, by intention, always difficult. This year it was especially so as it tested four essential skills of a yacht designer – digital rendering, hand sketching, planning a yacht’s general arrangement, and creating a decorative style for its interior. Competitors were also required to look into the mind of a young client and create a yacht that was both future-proofed and complementary to his lifestyle requirements. Among others, these featured a love for fine dining and good wine, partying, cinema and adventurous sports. The entrants were given four A4 pages to illustrate and explain their ideas, with the contents of each page clearly specified so that the jury of 15 eminent yacht designers who gathered in the Linley showroom in London could easily compare the submissions. Following a detailed study and discussion of the entries, the field was reduced to 12 before a secret ballot produced the six finalists. The honours eventually went to Valentin Weigand, whose accomplished forward-thinking design fulfilled every aspect of the given task.

Read more

Design & Innovation Awards 2024
Design & Innovation Awards 2024
Design & Innovation Awards 2024
Design & Innovation Awards 2024
Design and Innovation Awards 2024
Design & Innovation Awards 2023

Sponsored listings